![]() The Mac has similar tools as a Linux-based computer and you can use screen to connect to the serial console. You need to set the parameters to 8 Data bits, 1 Stop bit, and no parity, no flow control. Most likely your serial interface will be called COM3. Start it, select "Serial" as connection type, and enter your serial interface as well as the baud rate of 115200. PuTTY is a great tool for connecting to a serial console. If you are using an actual serial port on your computer, this would be /dev/ttyS0. ![]() ![]() dev/ttyUSB0 is most likely the device node for a USB-to-serial adapter. The command is:ġ15200 is the default baud rate for IPFire. USB/IP allows you to set up a USB server on one machine (e.g., on your printer/scanner server) and share it with the rest of your network as if it were connected directly to the client machine. On any Linux-based computer, you can use screen to connect to the serial console. Its called USB/IP (read: USB over IP) it is a set of modules and tools that comes with all modern kernels from 3.17 onwards. Since modern computers no longer come with a serial port, a USB-to-serial adapter can be used as well.Ĭonnect your firewall with the serial cable and your computer first and then power it on. For that, a serial cable ( null modem ) is required. IPFire can be configured using a serial console - which is a common way to configure network hardware like switches and firewalls.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |